Gears, Miniature & Gear Shafts
High Precision Turned Parts
Materials: Brass, Stainless Steel, Carbon Steel, Plastics etc.
Secondary operations: Tooth Polishing, Pivot Burnishing, Hardening, Plating, etc.
Assemblies such as Pinion & Shaft and complete Gearboxes are available.
| Example Of Bearing Assemblies | |
Bearing-assembly fitted Into the plate or bridge and held In position by a clamp. This type of removable bearing assembly enables an arbor to be dismantled without touching the other moving parts or unscrewing the plate.
Driven-In IC Jewel |
 |
Bearing-assembly driven Into the plate or bridge, with mobile jewel. A bearing-assembly of this type protects the lip of the pivot against axial shocks only.
Movile VP Jewel |
 |
Bearing-assembly screwed into the bridge, wtth two fixed jewels. A removable bearing-assembly of this kind enables the endshake of the pivot to be adjusted. |
 |
Bearing Assembly
Following is a typical design information necessary to dimension properly this assembly:
1) diameter of pivot: 0.48 +6/0 |
 |